Oscillating Knife CNC Cutter for Cardboard Foam Corrugated Paper – Manufacturer

RT-D2516/RT-S2516 CNC Oscillating Knife Cutting Machine, 1600×2500mm Working Area, 7.5kw Vacuum Pump — engineered for cardboard, foam, corrugated paper and packaging sample production.

  • Swiss-imported oscillating knife handles full cutting, half cutting and cursor location on materials up to 100mm thick
  • CCD camera positioning and auto typesetting software support PLT, DXF and AI file formats for accurate contour tracking
  • Taiwan Hiwin linear rails with digital servo motors deliver ≤0.1mm repeated accuracy across the full cutting area

Sample cutting on your own material is provided before order confirmation, with tool head and vacuum table zoning specified per your production requirement.

Description

Tool Head Matched to Board Grade — every oscillating knife configuration is tested on the buyer’s actual corrugated, foam or honeycomb stock before the machine leaves the Jinan workshop, eliminating the guesswork between blade angle, stroke frequency and downforce.

Technical Specifications

Parameter Value
Model RT-D2516/RT-S2516
Product Type CNC Oscillating Knife Cutting Machine
Working Area 1600 × 2500 mm
Machine Size 3450 × 2300 × 1250 mm
Rated Power 9 kW
Translational Velocity 800–2000 mm/s
Cutting Speed 200–800 mm/s (varies with material type and density)
Cutting Thickness Up to 100 mm (basis not stated in source — confirm material type and density)
Repeated Accuracy ≤ 0.1 mm
Table Type Flat working table or auto-feeding table
Vacuum Pump 7.5 kW
Multifunctional Head Swiss-imported knife with vibration full cut, half cut and cursor location
Transmission System Digital servo motor, linear guide, synchronous belt, imported ball screw
Servo Motor Options Delta or Panasonic (IP67)
Linear Rail Taiwan Hiwin
Conveyor Belt Germany imported
Frame Thick-walled seamless steel, high-temperature tempered, CNC machined
Table Surface Magnesium-aluminium alloy with fluorocarbon PVDF coating and anodic oxidation
Voltage 380 V ± 10 %
Instruction System HP-GL compatible
Software Auto typesetting, PLT / DXF / AI import
Control Panel Touch screen, multi-language
Safety Infrared sensors, anti-collision, emergency stop
Standards CE declaration where applicable

Application Suitability

Application Material or Output
Carton sample making Corrugated board, honeycomb cardboard, single and double wall
Packaging prototyping Foam board, grey board, PVC sheet, PP hollow sheet
Graphic and display production Sticker film, self-adhesive vinyl, magnetic sheet
Gasket and seal fabrication Rubber, silicone, PTFE, ETFE, non-woven fibre
Automotive interior trimming PU foam, EVA, XPE, sponge composite leather
Soft furnishing and textile Fabric, carpet, non-woven, PU leather
Advertising and signage Acrylic template, foam PVC, KT board

Why a "Cutting Speed Up to 800 mm/s" Can Mislead a Packaging Buyer

The number on the brochure only matters once you define what the blade is actually slicing through.

When a corrugated sample maker quotes translational velocity without naming the flute profile, the board weight or the number of plies, the figure becomes decorative. A single-face B-flute at 200 gsm behaves nothing like a double-wall BC-flute at 600 gsm, and an oscillating knife that tracks cleanly through one will crush or drag through the other. I once spent two full weeks re-tuning stroke frequency and blade angle after a Middle East customer sent in laminated foam board instead of the standard carton we used for the sample run — the machine was fine, the parameters were not. That gap between brochure speed and shop-floor reality is where packaging CNC cutting machine buyers lose confidence. A laser cutting and engraving machine manufacturer that also handles knife systems understands this trade-off because both technologies sit under one roof and the comparison is done honestly before the order is signed [NEED_CITE: material-specific cutting parameter validation in digital finishing].

RT-D2516 oscillating knife CNC cutter cutting corrugated board on flat vacuum table

Matching Knife Stroke to Flute and Foam Density

The Swiss-imported oscillating head on the RT-D2516/RT-S2516 runs a high-frequency vibration cycle that separates fibres rather than tearing them. On single-wall corrugated, a shorter stroke with moderate frequency keeps the liner intact while the blade passes through the medium. Switch to 30 mm EPE foam for protective pac*e clears the full depth without dragging residue back into the kerf. A laser cutting and engraving machine manufacturer offering both knife and laser processes can point buyers toward the correct method instead of forcing one head to cover every substrate.

Vacuum Zoning and Small-Part Hold-Down

A 7.5 kW vacuum pump feeding a full 1600 × 2500 mm table works well for large carton blanks, but once the nesting software fills the sheet with small gasket or label shapes, uncut stock can lift at the edges. The magnesium-aluminium table on the RT-D2516/RT-S2516 accepts zone valves so the operator isolates suction to the active cutting region. On low-mass sticker film or thin PP hollow sheet, this zoning prevents material drift that would otherwise push repeated accuracy beyond the stated ≤ 0.1 mm tolerance [NEED_CITE: vacuum hold-down zoning practices in flatbed digital cutting].

Reading the Spec Sheet Beyond the Headline Number

Cutting speed of 200–800 mm/s is a range, not a promise — the lower bound typically applies to dense rubber gasket or multi-ply composite, while the upper bound suits single-layer fabric or thin corrugated. The 9 kW rated power covers the spindle, vacuum and conveyor together; a buyer running the auto-feeding version with the conveyor belt engaged will see a different load profile than one using the flat table only. Taiwan Hiwin linear rails and an imported ball screw keep the carriage stable at the upper translational velocity, but belt tension and servo tuning still require periodic checks once the machine reaches daily production cycles. IP67-rated Delta or Panasonic servos resist dust ingress from cardboard and foam particles that accumulate around the gantry.

Touch screen control panel with multi-language interface on RT-S2516 cutting machine

What Wrong Tooling Costs a Packaging Line

Choosing a drag knife for thick honeycomb board produces ragged cell walls that compromise the compression strength of the finished package. Skipping the half-cut function on folding carton leaves the operator snapping creases by hand, adding a bottleneck downstream. If the vacuum zones are not set for nested label work, lifted material trips the infrared anti-collision sensor and halts the cycle, turning what should be a continuous run into a series of restarts. Each scenario traces back to a configuration decision made before the machine shipped [NEED_CITE: tool head selection criteria for oscillating knife cutting tables].

Why Source This Cutter From a Dual-Technology Workshop

The same Jinan facility that builds CO2 and fibre laser systems also assembles the RT-D2516/RT-S2516, so a buyer evaluating both knife and laser for different product lines deals with one engineering team. The in-house design group adjusts table length, conveyor feed and tool head mix per order rather than pulling a standard SKU from stock. Frame welding, high-temperature tempering and CNC machining of the gantry mounting surfaces happen on-site, giving traceability from raw steel to finished machine. Sample cutting on the buyer’s own corrugated, foam or gasket material is standard before dispatch, so cutting parameters ship with the unit instead of being guessed at installation. Voltage, plug type and control language are confirmed at order stage, not discovered at the destination port.

Documentation & Verification

  • Machine specification sheet listing tool head options and confirmed cutting depth per material
  • Electrical schematic with voltage and phase matching the buyer’s facility supply
  • Sample cutting report run on buyer-supplied corrugated or foam board before dispatch
  • Factory test record showing repeated accuracy verification across the full working area
  • Software licence and file format compatibility note for PLT, DXF and AI workflows
  • Spare parts list covering blades, knife holders and vacuum zone seals

Installation, Commissioning & Support

  • 3450 × 2300 mm footprint requires a level concrete floor with clearance for conveyor infeed and outfeed
  • Dedicated 380 V ± 10 % three-phase circuit rated for the 9 kW total load plus vacuum pump start-up surge
  • Gantry and table sections ship separately and are bolted and aligned on site using the CNC-machined reference surfaces
  • First-run parameter tuning performed on buyer’s own board grade, adjusting oscillation frequency and vacuum zone balance
  • Touch screen control training covers nesting import, tool path editing and multi-language switching for local operators
  • Spare oscillating knife blades, drag knife tips and vacuum seals included in the initial dispatch kit

Sending the Right Details With Your Inquiry

A packaging buyer gets a usable quotation faster by naming the exact board flute, foam density or gasket compound, the sheet size coming off the corrugator or laminator, and the daily volume of nested sheets expected. If the workshop runs 220 V 60 Hz or 415 V 50 Hz, state that early so the servo and vacuum pump are wound correctly. Mention whether existing CAD files are DXF or a proprietary packaging format so software compatibility is confirmed before the machine enters production.

Frequently Asked Questions

Q: How do I confirm the oscillating knife will cut my specific corrugated flute without crushing it?
A: Send a representative sample of the board grade, including flute profile and liner weight, to the factory. The machine is set up with matching blade angle, stroke length and oscillation frequency, and a cutting report is issued showing edge quality and dimensional accuracy before the unit is cleared for shipment.

Q: What is the difference between the flat table and auto-feeding table versions?
A: The flat table suits rigid board and short-run sample work where the operator loads each sheet manually. The auto-feeding version adds a Germany-imported conveyor belt and material roll or sheet feeder, supporting continuous nesting runs on corrugated, foam or fabric where throughput matters more than one-off prototyping flexibility.

Q: Which file formats does the software accept from my existing packaging CAD system?
A: The auto typesetting software imports PLT, DXF and AI files directly. If your CAD outputs a proprietary packaging format, share a sample file during the inquiry stage so the engineering team can confirm conversion accuracy or recommend a compatible plug-in before the machine is built.

Q: How is vacuum hold-down managed for small nested parts that tend to lift?
A: The table is divided into independently valved zones. The operator activates only the zones under the current cutting path, concentrating the 7.5 kW pump suction where material support is needed. This prevents thin film or lightweight label stock from drifting during high-speed contour cuts.

Q: Can the same machine handle both corrugated carton and foam gasket materials?
A: Yes, provided the tool head configuration includes both an oscillating knife for foam and a creasing wheel or drag knife for carton creasing. The multifunctional head accepts multiple tools, and the correct combination is specified at order based on the material list the buyer supplies.

Reviews (0)

商品评价

There are no reviews yet.

Be the first to review “Oscillating Knife CNC Cutter for Cardboard Foam Corrugated Paper – Manufacturer”

Your email address will not be published. Required fields are marked *

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.