Small Box Custom Cutter V-Groove Creasing Machine | Specifications

Configurable Tooling Per Material — The RT-D2516/RT-S2516 allows buyers to specify oscillating knife, creasing wheel or V-cutting head matched to their exact board grade and flute profile before production begins.

Technical Specifications

Application Suitability

Why Cutting Thickness Claims Fail on the First Production Run

A CNC Oscillating Knife Cutting Machine specified by working area alone frequently stalls when the buyer loads material thicker or denser than the quoted range. Tool head selection and vacuum hold-down, not just travel speed, determine what the table can actually cut at production rate.

Buyers often discover that a head configured for single-face corrugated crushes double-wall flute or leaves ragged edges on honeycomb board. The vacuum zone layout matters equally: small carton samples lift off the table at high translational velocity if the zoning is too coarse for the part footprint. [NEED_CITE: vacuum hold-down requirements for high-speed flatbed digital cutting].

Matching the Tool Head to Board Grade and Flute Profile

The multifunctional head on this CNC Oscillating Knife Cutting Machine accepts a Swiss imported oscillating knife for full and half cutting, a creasing wheel for fold lines, and a V-cutting knife for slot work on corrugated and honeycomb stock. A packaging sample maker producing custom boxes can run full-cut outlines, crease fold lines, and V-groove slots in a single table pass without manual tool changeover. Selecting the wrong knife amplitude or creasing wheel width for the flute profile produces crushed edges or incomplete folds that ruin the sample.

Vacuum Adsorption and Part Stability at Speed

The magnesium-aluminum alloy vacuum table is treated with fluorocarbon PVDF powder spraying and anodic oxidation to maintain flatness under repeated loading. A 7.5 kW vacuum pump with an integrated silencer provides suction across configurable zones. When cutting small carton samples or narrow gasket strips, the zone layout must match the part dimensions; otherwise the material lifts at the trailing edge during high-speed passes and the cut path drifts. [NEED_CITE: vacuum table zoning practices for small-format digital cutting].

Reading the Spec Sheet Against Your Production Reality

The repeated accuracy of ≤0.1 mm depends on the imported ball screw and linear guide working against a stress-relieved steel frame. Without high-temperature tempering and CNC machining of the frame, residual stress causes gradual drift over long production runs, and carton sample dimensions fall outside the die-line tolerance. The translational velocity of 800–2000 mm/s is achievable on thin materials; thicker honeycomb board and multi-layer composites require lower speeds to maintain edge quality and prevent knife deflection. Servo motor choice — Delta or Panasonic at IP67 rating — affects long-term positional accuracy in dusty workshop environments where ingress degrades encoder signals.

The Cost of Skipping Material Trials Before Order

A creasing wheel set for standard greyboard will tear the surface of double-wall corrugated, destroying both the sample and the wheel. When the buyer receives a machine configured without tested samples on their own stock, the first weeks go to re-tooling and discarding ruined blanks. Incorrect voltage specification discovered after energizing the servo drives can damage the amplifier board, leading to multi-week replacement delays. [NEED_CITE: consequences of misconfigured voltage on industrial servo systems].

Why Sourcing This Machine from Our Workshop Makes Sense

In-house design covers both knife cutting and laser cutting technologies, so the cutting method matches the material rather than forcing one method onto every substrate. Tool head and table configuration is specified per material type and production volume, not left as a generic default. CCD camera positioning is confirmed against the buyer’s printed marks at full production speed before the machine leaves the factory. Software compatibility is verified against the buyer’s existing PLT, DXF or AI files and nesting workflow before order confirmation. Voltage, plug type, and control panel language are customized to the destination facility, documented in writing before shipment. Sample cutting on the buyer’s own material is completed and a cutting report is issued before any commitment is required.

Documentation & Verification

• Machine specification sheet listing configured tool heads and table type
• Electrical schematic with confirmed voltage, plug type, and circuit requirements
• Tool head and vacuum table configuration list matched to your material stack
• Sample cutting report on your own board grade and thickness before dispatch
• Software license and file format compatibility note for PLT, DXF, and AI workflows
• Factory test record documenting accuracy and cycle performance before crating

Installation, Commissioning & Support

• Confirm a dedicated 380V ±10% circuit rated for the 9 kW total draw plus vacuum pump load
• The 3450 × 2300 × 1250 mm footprint requires level flooring with clearance for the auto feeding conveyor
• Frame arrives fully assembled; table leveling and belt tension checked during on-site commissioning
• First-run calibration sets servo parameters, vacuum zone mapping, and knife depth for your material
• Touch screen language set to operator preference during training, covering tool changes and file loading
• Spare knife blades, creasing wheels, and vacuum pump filters included for initial maintenance cycles

What to Prepare Before Requesting a Quote

Send the exact material types, flute profiles or board grades, and the thickest stock you plan to run daily. Confirm your facility voltage, frequency, and the control language your operators need. If your workflow relies on specific nesting software or existing DXF file libraries, share a sample file so compatibility can be verified before the quotation is finalized.

Frequently Asked Questions

Q: How is cutting thickness verified for my specific board grade and flute profile?
A: We run sample cuts on your actual material — including the thickest board and tightest crease line — before finalizing the tool head configuration. The sample cutting report documents edge quality, cut depth, and achievable speed so you see production results before committing to the order.

Q: What voltage and control language options are confirmed before shipment?
A: Default supply is 380V ±10%, but the system is configurable for other industrial voltages. Plug type and control panel language — English, Russian, Italian, Chinese, or a custom language — are locked in writing before production starts to avoid field rewiring or operator confusion.

Q: How does CCD camera positioning perform at production speed on printed marks?
A: The small CCD mark point camera and panoramic camera recognition are tested against your printed contour files at full translational velocity. We verify that mark detection keeps pace with cutting speed on your specific print quality before the machine ships.

Q: What file formats and nesting workflows does the software support?
A: The auto typesetting software accepts PLT, DXF, and AI files and is HP-GL compatible. Before quotation, we test your existing nesting files and workflow to confirm that contour extraction, tool path assignment, and material utilization run without manual conversion steps.

Q: Can the vacuum table be zoned for small carton samples without material lift?
A: The vacuum table supports zone mapping matched to your smallest part dimensions. During factory testing we verify suction distribution across zones to prevent trailing-edge lift at your target cutting speed on corrugated and honeycomb board.