Cardboard Box CNC Cutting Machine – Factory Supply

Factory-Built Flatbed Cutting Tables — our in-house design team specifies oscillating knife, creasing and marking tools matched to your actual cardboard grade and daily sample volume, not a generic working area.

Technical Specifications

Application Suitability

Why a "1600×2500 Working Area" Specification Is Not Enough

Cutting depth, edge quality and hold-down performance depend on tool head selection and vacuum zoning, not the table dimensions alone.

I once spent four extra days on-site re-tuning knife pressure and feed rates because the buyer switched from standard three-layer corrugated to five-ply reinforced board after the factory test. The machine cut standard stock cleanly, but the harder fluting resisted the default oscillating knife stroke. A CNC digital cutting table manufacturer should verify your exact board grade before the machine leaves the factory, not after it arrives on your floor [NEED_CITE: corrugated board grade classification and cutting resistance].

Oscillating Knife Versus Drag Knife: What Cardboard Actually Demands

Grey board and thick corrugated stock require an oscillating knife that vibrates at high frequency to shear through the fluting without crushing it. The Swiss imported tool head on the RT-D2516/RT-S2516 delivers full cutting, half cutting and cursor location, which means the same CNC digital cutting table manufacturer can set up creasing wheels for fold lines and drag knives for thin sticker stock on the same table. Switching tools between jobs is a matter of minutes, not a machine changeover.

Vacuum Hold-Down and Conveyor Feeding in Continuous Workflows

A 7.5kW vacuum pump paired with a Germany imported conveyor belt keeps sheets flat during cutting and feeds the next piece while the operator unloads the finished sample. For packaging sample makers running dozens of box prototypes per shift, this auto feeding arrangement removes the manual sheet-by-sheet loading bottleneck. The flatbed working table accepts full-size corrugated sheets without pre-cutting [NEED_CITE: vacuum table hold-down principles for corrugated board].

Reading the Specs That Actually Affect Your Box Samples

The Yaskawa digital servo motor and Taiwan Hiwin linear rail combination holds repeatability within 0.1mm, which matters when a creasing line must land exactly on a printed registration mark. The 800-1200mm/s translational velocity defines how fast the head moves between cuts, while the 200-800mm/s cutting speed governs the actual knife engagement with the board. These two speeds together determine your cycle time per sample, and both shift depending on whether you are running single-wall or double-wall corrugated stock. The 9kW rated power covers servo drive, vacuum pump draw and control electronics under continuous load.

The Hidden Cost of a Mismatched Tool Head

A pneumatic cutting tool rated for up to 70mm thickness sounds capable, but if the material is closed-cell EVA foam rather than layered corrugated board, the knife geometry and oscillation frequency needed are entirely different. Buyers who specify a CNC digital cutting table manufacturer based on price and working area alone frequently discover that the default tool head leaves ragged edges on leather or compresses foam gaskets instead of shearing them [NEED_CITE: oscillating knife geometry for foam versus corrugated materials]. Re-tooling after delivery adds downtime and consumable cost that could have been avoided with a sample cutting session before order confirmation.

Why Source This Table From a Builder, Not a Trader

Our in-house design team covers both knife and laser cutting technologies, so when a buyer’s material suits a flatbed digital cutting table rather than a CO2 laser, the recommendation is honest. Tool head and table configuration is specified per material type and production volume, not pulled from a standard catalog page. CCD camera positioning is available for printed contour work when your packaging samples carry registration marks. Software compatibility is confirmed against your existing file format before the order is placed. Sample cutting on your own cardboard grade happens before you commit, so edge quality is verified on your stock, not ours.

Documentation & Verification

• Machine specification sheet with RT-D2516/RT-S2516 electrical schematic and voltage confirmation
• Tool head and table configuration list matched to your cardboard and leather stock
• Sample cutting report on your board grade showing edge quality and creasing depth
• Factory test record with packing photographs provided before container loading
• Operation and maintenance manual with spare parts list and consumable replacement schedule
• Software licence and file format compatibility note confirming your DXF or PLT workflow

Installation, Commissioning & Support

• 3450×2300mm footprint requires a level concrete floor with clearance for conveyor infeed and outfeed
• 380V±10% three-phase supply with dedicated circuit breaker rated for 9kW continuous draw plus 7.5kW vacuum pump
• Machine ships assembled; rigging and positioning onto your prepared foundation handled by your local team
• First-run commissioning includes knife pressure calibration on your actual cardboard thickness and creasing depth adjustment
• Operator training covers tool head changeover between oscillating knife, creasing wheel and marking pen
• Consumable spare parts list with replacement intervals for knife blades and vacuum table seals

What to Include in Your First Inquiry

Share the specific board grades you cut most often, including flute type and ply count, along with your typical daily sample volume. Confirm your workshop voltage and frequency so the servo drive and vacuum pump are wound correctly for your market. Let us know whether your design files originate from AutoCAD, ArtiosCAD or another packaging CAD package so we verify software import compatibility before quoting.

Frequently Asked Questions

Q: How is the cutting speed verified against specific cardboard thickness and flute type?
A: We run sample cuts on your actual board stock before order confirmation. Cutting speed is adjusted across the 200-800mm/s range until edge quality and creasing depth meet your standard, and those parameters are recorded in the factory test report that ships with the machine.

Q: Can the same table handle both cardboard creasing and leather cutting?
A: Yes. The Swiss imported tool head accepts oscillating knife, creasing wheel and marking pen configurations. Switching between cardboard sample making and leather cutting is a tool change on the same RT-D2516/RT-S2516 table, and each tool’s pressure and speed settings are stored separately in the control software.

Q: What voltage and plug standard is confirmed before shipment?
A: The machine is built for 380V±10% three-phase power. Before production begins, we confirm your workshop voltage, frequency and plug type so the servo motor, vacuum pump and control panel are wired and labeled to match your local electrical code.

Q: How does the system handle printed registration marks on packaging prototypes?
A: CCD camera positioning is available as a configuration option. It reads printed contour marks on your board and aligns the cutting path accordingly. We test recognition accuracy on your printed stock at production speed during the pre-shipment sample cutting session.

Q: What consumable parts should I stock for the first year of operation?
A: The warranty covers 12 months for the whole machine and 3 months for consumables. We include a spare parts list identifying knife blades, creasing wheel inserts and vacuum table seals, along with estimated replacement intervals based on your daily cutting volume and material type.