Intelligent CNC Box Maker Die-Free Cardboard Cutter 1625 – PLC Control

Configuration Matched to Material — Seven tool heads available on this 1625 CNC table mean corrugated board gets creased while foam gets sliced, not forced through the wrong blade.

Technical Specifications

Application Suitability

Why the Wrong Tool Head Wastes More Than Material

A single oscillating knife pushed through BC-flute board and EVA foam produces ragged edges on one and crushed cells on the other.

I remember setting up a cutting table for a Mexican client who sent beautiful corrugated samples. We dialed in the oscillating knife, and the cuts were clean. Then production started with their local recycled stock — shorter fibers, uneven hardness — and the same blade setting tore the edges. They stopped the line and called us. The fix was not a parameter tweak; it was matching the driven rotary knife to their actual material. With the 1625, you can configure up to seven tool heads on one table so each material meets the correct cutting action [NEED_CITE: cutting tool selection by material fiber structure].

Matching the Blade to the Substrate

The laser cutting and engraving machine handles edge sealing on synthetics and fine contour work, but structural packaging cuts demand a physical blade that matches the substrate. An oscillating knife vibrates at high frequency to slice through multi-layer corrugated without dragging the flutes, while a creasing wheel presses a fold line without cutting the liner. Running both operations on the same table eliminates the die-making step entirely for sample and short-run work.

Vacuum Holding Across the Table Surface

The aluminum bellows vacuum table provides full-surface adsorption, which matters when small cut parts sit between larger sheets. On a partitioned table with insufficient zoning, small pieces lift when the knife passes, shifting position and ruining the tolerance. The 9 kW vacuum pump paired with this table keeps both full sheets and nested small parts flat during the cut cycle [NEED_CITE: vacuum hold-down requirements for CNC flatbed cutting].

Reading the Specs Beyond the Numbers

Cutting accuracy at ±0.1 mm means crease lines align with cut edges across a 2500 mm stroke, so box folds register correctly on the first sample. The 1500 mm/s maximum speed is the travel rate; actual throughput depends on material hardness, path complexity, and the number of tool changes in a job. A 9 kW vacuum pump is sized to hold lightweight cardstock and heavier BC-flute board alike, but the real test is whether small parts under 50 mm remain seated during high-speed passes. Voltage configurable across 110V, 220V, and 380V means the electrical system must be confirmed against your facility supply before the machine leaves the factory — frequency mismatches cause servo drift that no parameter adjustment fixes on site.

What Happens When Configuration Is Skipped

Choosing a table based on working area alone and ignoring material behavior leads to downtime. Crushed foam inserts that should cushion a product arrive deformed. Crease lines that miss the cut edge by a fraction of a millimeter make boxes that refuse to fold square. Voltage confirmed too late means a transformer sits in the shipping crate, adding cost and a point of failure [NEED_CITE: electrical specification confirmation before equipment shipment].

What This Build Offers the Packaging Line

In-house design covers both knife cutting and laser cutting and engraving machine technology, so the cutting method is matched to the material rather than forced through one process. Tool head and table configuration are specified per your material stack and production volume before the order is placed. CCD camera positioning is available for printed contour registration on packaging graphics. Software compatibility with your existing PLT, DXF, AI, or PDF workflow is confirmed before the machine ships. Sample cutting on your actual material — including recycled stock with variable fiber content — is completed and documented before commitment.

Documentation & Verification

• Tool head and table configuration list specifying included tools matched to each material
• Sample cutting report on your corrugated flute type and foam density before dispatch
• Electrical schematic with voltage and frequency confirmed for your facility
• Software licence and file format compatibility note for PLT, DXF, AI, PDF workflows
• Operation and maintenance manual in your selected control language

Installation, Commissioning & Support

• Floor space of approximately 3300×2100 mm required with clearance for material loading on the 1625 table
• Dedicated electrical circuit matching confirmed voltage (110V/220V/380V) before the PLC panel is energized
• Vacuum pump 9 kW circuit isolated from servo drives to prevent startup voltage drop
• First-run parameter setting completed on your material samples at the factory before crating
• Operator training covers tool head changes and creasing wheel pressure adjustment for your board grades
• Spare parts list includes oscillating knife blades, creasing wheels, and vacuum table seals

Before You Request a Quote

To get a configuration that holds up in production, share the corrugated flute types and foam densities you actually run — not just the sample you mailed. Tell us your facility voltage and frequency, the control language your operators need, and whether your design files come from ArtiosCAD, AutoCAD, or Illustrator. If you run recycled stock, say so; the fiber structure changes the tool head selection.

Frequently Asked Questions

Q: How is cutting thickness verified for my specific corrugated flute type?
A: We run your actual material on the table and document edge quality, crease integrity, and cut depth. The ≤40 mm rating depends on material density; BC-flute board and high-density EVA foam behave differently at the same nominal thickness. You receive a sample cutting report before the order is confirmed.

Q: Which tool heads do I need for corrugated board plus foam inserts?
A: A typical configuration pairs an oscillating knife for corrugated cuts with a creasing wheel for fold lines, plus a dedicated knife for foam that avoids crushing the cell structure. We recommend the combination after reviewing your material samples and production mix.

Q: Does the packaging software work with my existing design files?
A: The PLC system accepts PLT, DXF, AI, and PDF formats. We test your actual design files during the sample cutting stage to confirm import, nesting, and path generation before the software licence is finalized and shipped.

Q: What voltage and language options are confirmed before shipment?
A: Voltage is configurable across 110V, 220V, and 380V with frequency confirmed against your local supply. Control panel and software languages include English, Russian, Italian, and Chinese, with custom languages available. All electrical specifications are locked before production begins.