Honeycomb Board CNC Cutting Machine – Industrial Application

Voltage, language and specification customization — every RT-D2516/RT-S2516 ships with electrical schematics matching your local supply and control language confirmed before production, so the machine runs on day one without transformer workarounds or menu guesswork.

Technical Specifications

Application Suitability

Why the Voltage Question Should Come Before the Price on Any CNC Laser Cutting and Engraving Machine Manufacturer Order

A machine wired for 50 Hz running on 60 Hz mains will overheat its vacuum pump within weeks, and the warranty won’t cover it.

I have seen workshops in North America receive European-configured flatbed cutters and spend the first month chasing servo faults that turned out to be frequency mismatch. The RT-D2516/RT-S2516 pulls 9 kW total with a dedicated 7.5 kW vacuum pump, which means the supply circuit and breaker sizing must match your local grid exactly. When buyers skip this conversation during quoting, the machine arrives with the wrong plug, the wrong motor winding, or a control panel locked in a language the operator cannot read. [NEED_CITE: voltage and frequency standards by export market]

Oscillating Knife Mechanics on Honeycomb and Board Stock

The Swiss imported knife head on this platform performs vibration full cutting, vibration half cutting and cursor location in a single pass sequence. For honeycomb board packaging, the oscillating stroke must shear through the honeycomb core without crushing the flutes, which is why the vibration frequency matters more than raw downforce. A CNC laser cutting and engraving machine manufacturer offering knife-cutting alongside laser options lets you match the process to the substrate rather than forcing cardboard through a CO2 beam that chars the edges.

Vacuum Zoning and Continuous Feed for Sheet-to-Sheet Runs

The 7.5 kW vacuum pump paired with the Germany imported conveyor belt creates a hold-down zone that keeps large honeycomb sheets flat while the auto-feed conveyor advances the next sheet into position. Without adequate vacuum zoning, small packaging inserts lift off the table mid-cut, producing dimensional drift and scrapped nests. The flat working table on the RT-D2516/RT-S2516 covers 1600×2500 mm, which accommodates most standard packaging board sizes without repositioning. [NEED_CITE: vacuum hold-down requirements for thin board and flexible materials]

What the Yaskawa Servo and Hiwin Rail Mean for Repeatability

The ≤0.1 mm repeatability figure comes from the combination of Japanese Yaskawa digital servo motors and Taiwan Hiwin linear rails, not from the controller alone. In packaging sample making, a crease line that shifts by half a millimeter between the first prototype and the fiftieth copy means the folding carton will not close properly on the packing line. The imported ball screw and synchronous belt transmission keep the carriage tracking true across the full 2500 mm travel, so the cut geometry you approve on the sample is what the machine reproduces in production.

When the Wrong Tool Head Ruins the Edge

A drag knife dragged through corrugated honeycomb board leaves a ragged, torn edge that shows through the finished packaging. An oscillating knife forced into thin PVC film produces chatter marks because the vibration amplitude exceeds the material thickness. I once watched a buyer specify a single creasing wheel for a job that alternated between grey board and sponge composite leather, and every material changeover required swapping the tool head manually, killing throughput. The multifunctional head on the RT-D2516/RT-S2516 handles these switches within the program, but only if the correct knife type is selected during configuration. [NEED_CITE: tool head selection guidelines for oscillating versus drag knife cutting]

Why Buyers Source From This Production Floor

The in-house design team covers both knife and laser cutting technology, so a packaging buyer comparing edge quality on honeycomb board can request a CO2 laser sample and a knife sample side by side before committing. Every machine goes through a factory test using the buyer’s own material, generating a sample cutting report that shows actual edge condition and achievable thickness. Voltage, plug type and control language are locked in the electrical schematic before production starts, not guessed at the packing stage. The HP-GL compatible instruction system means your existing DXF or PLT packaging files import without format conversion software.

Documentation & Verification

• Factory test record on your honeycomb board or grey board thickness before dispatch
• Electrical schematic confirming voltage, frequency and plug type for your market
• Tool head and vacuum table configuration list matched to your material set
• Software licence with file format compatibility note for DXF, PLT and AI imports
• Operation and maintenance manual in your confirmed control language
• Spare parts list with consumable blade and belt part numbers

Installation, Commissioning & Support

• Dedicated 380V circuit with breaker sized for 9 kW total draw plus startup surge
• Level floor required across the 3450×2300 mm footprint to preserve rail alignment
• Machine ships in single frame assembly with conveyor bolted and wired at factory
• First-run parameter tuning on your packaging board stock during on-site commissioning
• Oscillating knife blade replacement training using the quick-change tool holder
• Vacuum pump filter and conveyor belt tension check at monthly intervals

What We Need to Quote Accurately

Send the exact material type, thickness and maximum sheet size you run, along with your daily volume target and whether you need sample cutting on your stock before order confirmation. Confirm your local voltage, frequency and plug standard so the electrical build is right the first time.

Frequently Asked Questions

Q: How is cutting capacity verified for my specific honeycomb board thickness before order?
A: We run your actual material on the RT-D2516/RT-S2516 during factory testing and issue a sample cutting report showing edge quality, achievable depth and cycle time. This eliminates guesswork from spec sheets and confirms the oscillating knife handles your board without crushing the core.

Q: Which tool head configuration matches my material — oscillating knife, drag knife or creasing wheel?
A: Honeycomb board and corrugated stock typically need the oscillating knife for clean through-cuts, while creasing wheels handle fold lines on grey board. We specify the tool head combination based on your material list and send a configuration document before production.

Q: What voltage, plug type and control language options are confirmed before shipment?
A: The electrical schematic locks in your local 380V variant, frequency and plug standard during the quoting stage. Control language is confirmed in writing so the operator interface matches your workshop. We do not ship until these details are signed off.

Q: How does the vacuum table zoning handle small packaging inserts without material lift?
A: The 7.5 kW vacuum pump provides sufficient suction across the 1600×2500 mm flat table to hold small nested parts flat during cutting. We confirm vacuum adequacy during sample testing on your specific sheet size and nesting layout.

Q: What file formats does the software accept and does it integrate with my existing nesting workflow?
A: The HP-GL compatible instruction system accepts DXF, PLT and standard vector formats. We provide a file format compatibility note before order to confirm your current CAD output imports cleanly without third-party conversion.