Packaging CNC Oscillating Knife Cutting Machine – Specifications

RT-D2516/RT-S2516 CNC Oscillating Knife Cutting Machine, 1600×2500mm Working Area, 9kW Rated Power — configured for packaging carton sample making, sticker contour cutting, and flexible material fabrication.

  • Swiss imported oscillating knife with full/half cutting and cursor location, matched to material thickness and edge quality requirement
  • Aluminum alloy honeycomb vacuum platform with zoned automatic follow, Taiwan Delta servo motors, repeated accuracy ≤0.1mm
  • Professional carton nesting software with HP-GL compatibility and multi-format import, voltage and language customization confirmed before shipment

Sample cutting on your own material available before commitment, with tool head and table configuration specified per production volume.

Description

Knife over laser for clean edges — the RT-D2516/RT-S2516 uses a Swiss oscillating knife instead of a CO2 beam, so cardboard, sticker, and flexible materials cut without burnt edges or extraction headaches.

Technical Specifications

Parameter Value
Model RT-D2516 / RT-S2516
Product Type CNC Oscillating Knife Cutting Machine
Working Area 1600 × 2500 mm
Machine Dimensions 3450 × 2300 × 1250 mm
Rated Power 9 kW
Vacuum Pump Power 7.5 kW
Working Table Flat aluminum alloy honeycomb vacuum adsorption platform
Tool Head Swiss imported oscillating knife (full cut, half cut, cursor location)
Translational Velocity 800–2000 mm/s
Cutting Speed 200–800 mm/s (basis to be confirmed — varies with material type and thickness)
Cutting Thickness Capacity ≤ 100 mm (varies with material)
Repeated Accuracy ≤ 0.1 mm
Transmission System Taiwan Delta digital servo motor, Taiwan Hiwin linear guide, synchronous belt, ball screw, rack transmission
Auto Feeding System Germany imported conveyor belt
Safety Devices Infrared sensors and emergency stop
Voltage 380 V ± 10 %
Instruction Format HP-GL compatible
Software Professional carton nesting software; multi-format file import; language customization (English, Russian, Italian, Chinese, etc.)
Assembly State Fully assembled before shipment

Application Suitability

Application Material or Output
Packaging carton sample making Corrugated board, white cardstock, coated art board, grey board
Express and snack food packaging boxes Single-face and double-face corrugated, kraft board
High-end gift box prototyping Laminated copperplate paper, PVC sheet, foam board
Sticker and label contour cutting Self-adhesive vinyl, sticker sheet, reflective film
Billboard and signage production Foam PVC, acrylic sheet, KT board
Leather and footwear cutting Genuine leather, PU synthetic, sponge composite leather
Garment and flexible material fabrication Fabric, cotton, nylon, soft glass, silicon, rubber

Why Material Thickness Breaks a "Working Area Only" Purchase

A packaging CNC cutting machine specified purely by table size often fails when it meets the buyer’s real stock. The cutting method and tool head must match the material, not just the sheet dimensions. I have watched customers invest in a flatbed based on the 1600 × 2500 mm footprint, only to discover the oscillating knife could not penetrate their triple-wall corrugated board or that the vacuum zones left small carton flaps lifting mid-cut. [NEED_CITE: common causes of flatbed cutting machine rejection after installation]

The wrong tool head choice on the RT-D2516/RT-S2516 produces ragged edges on coated stock or crushed flute structure on corrugated. A laser cutting and engraving machine might handle thin card cleanly, but on PVC sticker sheets it creates toxic fumes and yellowed edges. That is exactly why this configuration starts with a material audit before any specification is locked down.

CNC oscillating knife cutting machine working on corrugated packaging board

Matching the Knife Stroke to Packaging Stock

The Swiss imported oscillating knife on this laser cutting and engraving machine alternative delivers three functions in one head: full cutting for through-cuts, half cutting for crease lines, and cursor location for registration marks. Corrugated board up to the rated thickness range requires high-frequency vibration to slice cleanly through flute peaks without dragging the liner. Coated art board and laminated copperplate, the kind that gave me trouble on a Middle East packaging sample project, need a lower amplitude and sharper blade angle to prevent fiber tear at the edge.

Vacuum Zoning That Actually Holds Small Parts Down

The aluminum alloy honeycomb platform is divided into independently controlled vacuum zones. On a carton sample run with dozens of small die-cut shapes, the zones beneath active cutting areas stay engaged while unused sections close off, concentrating suction where it matters. Small sticker contours and business card tags are the pieces most likely to lift during rapid traverse, and zoned follow-suction keeps them pinned without requiring a full-sheet sacrificial underlay. [NEED_CITE: vacuum hold-down effectiveness on small-format digital cutting]

Reading the Drive and Accuracy Numbers

The Taiwan Delta servo motors paired with Hiwin linear guides and rack transmission deliver repeated accuracy of ≤ 0.1 mm across the full 1600 × 2500 mm travel. For packaging sample work, that tolerance keeps crease lines aligned with cut lines so the finished box folds square. The 7.5 kW vacuum pump is sized to maintain suction through the honeycomb table at the machine’s maximum translational velocity of 2000 mm/s, meaning the operator does not have to slow traverse speed to compensate for part movement. HP-GL instruction compatibility lets the nesting software accept files from standard packaging CAD systems without format conversion steps that introduce geometry errors.

Servo motor and linear guide assembly on RT-D2516 CNC cutting table

What Ragged Edges and Crushed Flutes Really Cost

A carton sample with a torn edge at the fold line gets rejected by the brand client, and the sample maker re-runs the entire batch on slower settings. On sticker contour work, a half-cut that nicks the backing liner means the label will not weed cleanly, turning a fast nesting layout into manual picking. When the vacuum zones are too coarse for small parts, lift causes the knife to skip, leaving uncut bridges that operators have to hand-trim — [NEED_CITE: hidden rework cost in packaging sample making] — eroding the throughput gain the machine was supposed to deliver.

Why Buyers Source This Configuration Here

The in-house design team covers both knife and laser cutting paths, so a buyer comparing the RT-D2516/RT-S2516 against a CO2 laser cutter for packaging gets an honest recommendation based on material behavior rather than a single-product pitch. Every tool head and vacuum table configuration is documented against the buyer’s actual stock. Sample cutting on the buyer’s own material — the laminated copperplate that once cost me two sleepless nights — is completed before the order is confirmed. Voltage, plug type, and control language are locked in writing before production starts, not discovered on the packing list. The carton nesting software license and file format compatibility note ship with the machine so the operator can import existing jobs on day one.

Documentation & Verification

  • Factory test record run on buyer’s own corrugated and sticker stock before dispatch
  • Tool head and vacuum zone configuration list matched to confirmed material types
  • Software license key and file format compatibility note included in delivery package
  • Electrical schematic with confirmed voltage, plug standard, and control language
  • CE declaration documentation where applicable to destination market
  • Spare parts list with oscillating knife blades and conveyor belt segments

Installation, Commissioning & Support

  • Fully assembled 3450 × 2300 × 1250 mm frame requires level concrete floor with clearance for conveyor feed
  • Dedicated 380 V ± 10 % circuit with separate breaker for 9 kW machine load and 7.5 kW vacuum pump
  • First-run parameter setting on buyer’s corrugated board thickness and sticker contour files
  • Operator training covers knife changeover between full-cut and half-cut modes
  • Replacement oscillating knife blades and Germany conveyor belt segments stocked for reorder
  • Honeycomb vacuum platform cleaning schedule aligned with adhesive sticker residue buildup

Before You Send an Inquiry

To size the RT-D2516/RT-S2516 correctly, we need your thickest corrugated flute type, the coated or laminated stock you run for gift boxes, and your sticker sheet dimensions. Share your workshop voltage and frequency, the control language your operators read, and whether your existing nesting files are HP-GL or another format. If your daily volume mixes carton samples with sticker contour runs, tell us the split so we can configure the auto-feeding conveyor and vacuum zoning accordingly.

Frequently Asked Questions

Q: How does cutting thickness vary across different packaging materials on this machine?
A: The ≤ 100 mm capacity applies to low-density materials like sponge and foam board. Corrugated board, cardstock, and sticker sheets cut well within that range, but effective thickness depends on material density and flute structure. The Swiss oscillating knife is selected per material, and a sample cutting report confirms the achievable depth before order confirmation.

Q: Can the voltage, plug, and control interface be matched to my local standard?
A: The standard supply is 380 V ± 10 %, but plug type, frequency, and control panel language are confirmed before production. English, Russian, Italian, and Chinese are available. The electrical schematic in the documentation package reflects the exact configuration shipped, so your electrician can wire the dedicated circuit without guesswork.

Q: How does the vacuum table prevent small carton parts from lifting during cutting?
A: The aluminum honeycomb platform uses zoned automatic follow-suction. Only the zones under the active cutting path stay engaged, concentrating the 7.5 kW vacuum pump’s hold-down force on small sticker contours and business card tags that would otherwise drift during high-speed traverse at up to 2000 mm/s.

Q: Will my existing packaging design files import without conversion issues?
A: The carton nesting software accepts HP-GL and multiple common vector formats. File format compatibility is verified against a sample of your production files before the order is finalized, and a compatibility note ships with the machine so your design team knows exactly which import settings to use.

Q: How do I verify edge quality before committing to the purchase?
A: Send us your actual corrugated board, coated cardstock, and sticker sheet samples. We run them on the configured RT-D2516/RT-S2516 and deliver a sample cutting report showing edge condition, cut depth, and cycle timing. That report becomes the acceptance benchmark before the machine enters production.

Reviews (0)

商品评价

There are no reviews yet.

Be the first to review “Packaging CNC Oscillating Knife Cutting Machine – Specifications”

Your email address will not be published. Required fields are marked *

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.