1625 Digital Cutter for Packaging & Carton Sample Making – Factory Supply

1625 CNC Oscillating Knife Cutting Machine, 1600×2500mm, ≤40mm Thickness, ±0.1mm Accuracy — configured for packaging and carton sample making without physical die molds.

  • Interchangeable tool heads (oscillating knife, creasing wheel, V-groove, milling) matched to corrugated board, foam, and carton by ply count and flute type
  • Aluminum bellows vacuum table with 9KW pump ensures full hold-down on small parts during high-speed cutting
  • Dedicated packaging box structure design software supports PLT, DXF, AI, and PDF file formats

Buyers receive a sample cutting report on their own material before order, with voltage, plug, and control language confirmed pre-shipment.

Description

In-house tooling configuration per material — Every Realtop 1625 oscillating knife cutting machine for packaging ships with tool heads matched to your specific board grade and flute profile, validated on your own material before dispatch.

Technical Specifications

Parameter Value
Model 1625
Product Type CNC Oscillating Knife Cutting Machine
Cutting Area 1600 × 2500 mm
Cutting Speed 0–1500 mm/s
Cutting Thickness ≤ 40 mm
Cutting Accuracy ±0.1 mm
Tool Head Options Oscillating knife, Driven rotary knife, Creasing wheel, Kiss cutting tool, Pneumatic knife, Milling tool, V-groove knife
Vacuum Table Aluminum bellows vacuum table
Vacuum Pump 9 kW
Servo Motor Options Panasonic, Delta, Dorna
Control System PLC control panel with optional display languages
Voltage Options 110V, 220V, 380V
Profile Formats Supported PLT, DXF, AI, PDF
Safety Devices Infrared sensor device and emergency stop device
Machine Size 3300 × 2100 × 1350 mm
Software Dedicated packaging box structure design software
Standard CE declared

Application Suitability

Application Material or Output
Packaging sample making Corrugated board (E-flute, B-flute, BC-flute), greyboard, art paper
Carton prototyping Single and double-wall corrugated, folding carton stock
Protective insert fabrication EVA, EPE, PU foam sheets
Thin plastic sheet cutting PVC, PET for blister and clamshell patterns
Gasket and pad production Rubber mats, non-woven fabric, composite laminates
Leather and synthetic cutting Genuine leather, PU leather for luxury packaging inserts

Why Material Thickness Beats Working Area in Machine Selection

A CNC oscillating knife cutting machine for packaging specified on table size alone often fails once real production stock hits the bed — because board thickness, ply count, and flute profile determine whether the tool head can complete a clean cut cycle, not whether the sheet fits within the perimeter.

Tool head selection and vacuum hold-down must be matched to the thickest, densest material in your production mix, not the average.

I have watched packaging sample rooms stall because a machine was sold on its 1600 × 2500 mm footprint while the buyer’s BC-flute corrugated stock exceeded the cutting depth the configured oscillating knife could handle. The creasing wheel scored the surface but left unbroken fibres at the fold line. The vacuum zones were sized for full sheets, so nested small parts lifted at 1200 mm/s, forcing the operator to drop speed manually [NEED_CITE: material hold-down requirements for high-speed digital die-cutting]. These are not defects — they are configuration mismatches that a pre-order sample cut on your own board would have revealed before the machine left the factory.

Realtop 1625 CNC oscillating knife cutting machine for packaging on corrugated board

Tool Head Logic Across Packaging Substrates

The 1625 carries interchangeable tool heads — oscillating knife, driven rotary knife, creasing wheel, kiss cutting tool, pneumatic knife, milling tool, and V-groove knife — each assigned to a specific material behaviour. Corrugated board requires the oscillating knife for through-cuts and the creasing wheel for fold lines in the same job cycle. Foam inserts need the oscillating knife at a different stroke frequency to avoid crushing the cell structure. Thin PVC for window patches responds better to the kiss cutting tool, which scores the liner without penetrating the backing.

Vacuum Zoning That Actually Holds Small Parts

The aluminum bellows vacuum table paired with a 9 kW pump maintains hold-down across the full 1600 × 2500 mm bed. However, zoning granularity determines whether a 50 mm carton tab stays flat during a 1500 mm/s pass. When zoning is too broad, small nested parts experience lift at the edges, producing dimensional drift that accumulates across the sheet [NEED_CITE: vacuum table zoning standards for digital flatbed cutters]. The configuration sheet provided before order confirms zone layout against your typical nesting pattern.

Reading the Specs That Matter for Packaging Output

The ±0.1 mm cutting accuracy holds at production speed across the 1600 × 2500 mm envelope, which matters when scored fold lines must register with printed graphics on pre-printed corrugated. The PLC control panel supports optional display languages, eliminating reliance on a single bilingual operator during shift changes. The dedicated packaging box structure design software imports PLT, DXF, AI, and PDF profiles, so your existing structural design files load without intermediate conversion. The servo motor selection — Panasonic, Delta, or Dorna — is specified based on the acceleration profile your material demands rather than defaulting to one option across all builds. Voltage is configurable at 110V, 220V, or 380V, confirmed against your facility supply before the machine enters assembly [NEED_CITE: industrial voltage and frequency standards by export destination].

PLC control panel and tool head carriage on the Realtop 1625

The Hidden Cost of Skipping the Configuration Conversation

When a packaging digital cutting table ships with a generic tool head set, the first week on your floor becomes a commissioning exercise the factory should have completed. Ragged edges on double-wall corrugated mean the oscillating knife stroke was set for lighter stock. Crushed foam inserts mean the stroke frequency was too aggressive. Lift on small carton tabs means the vacuum zones were never mapped to your nesting files. Each of these surfaces as a production stoppage, not a parameter adjustment, because the operator lacks the baseline reference the factory test would have established.

Why Source This CNC Oscillating Knife Cutting Machine for Packaging Here

In-house design covers both the knife cutting platform and the packaging-specific software layer, so the 1625 arrives configured for carton sample workflows rather than adapted from a generic cutting table. Tool head and table configuration is specified per your material list and daily volume before quotation, not selected from a dropdown after payment. The sample cutting report runs on your actual board stock — including your flute profile, ply count, and printed contour — so edge quality and cycle time are confirmed before commitment. Voltage, plug type, and control language are locked in the specification confirmation step, eliminating on-site electrical surprises. Software file format compatibility is verified against your existing PLT, DXF, AI, or PDF workflow before the order enters production.

Documentation & Verification

  • Machine specification sheet confirming tool head and table configuration for your material range
  • Electrical schematic with voltage and plug type locked to your facility supply
  • Sample cutting report on your corrugated board and foam stock with edge quality photographs
  • CE declaration documentation for machinery directive compliance
  • Factory test record documenting cutting accuracy and cycle time on your files
  • Software licence and file format compatibility note for PLT, DXF, AI, PDF import

Installation, Commissioning & Support

  • Floor space allocation based on the 3300 × 2100 × 1350 mm machine footprint plus operator clearance
  • Dedicated circuit rated for the 9 kW vacuum pump and servo drive combined load
  • Machine arrives fully assembled with vacuum table and tool carriage pre-mounted
  • First-run commissioning includes calibration of cutting depth against your board thickness range
  • Operator training covers tool head changeover between oscillating knife and creasing wheel
  • Spare tool head and creasing wheel set packed with shipment to prevent line stoppage

What to Include in Your Inquiry

Send your primary material types with flute profile or foam density, typical sheet dimensions, and daily sample volume so the tool head and vacuum zone configuration can be specified before quotation. Confirm your facility voltage and frequency, preferred control panel language, and whether your existing structural design files use PLT, DXF, AI, or PDF format. If you need a sample cut on your own stock before order confirmation, ship a representative sheet and your production file.

Frequently Asked Questions

Q: How do I choose between oscillating knife and creasing wheel for corrugated board?
A: The oscillating knife handles through-cuts on flute profiles up to 40 mm, while the creasing wheel scores fold lines without severing the liner. Most carton sample jobs use both in the same cycle. The correct combination is confirmed during the sample cutting trial on your actual board stock before the machine configuration is finalised.

Q: Will small nested carton parts stay flat during high-speed cutting?
A: The aluminum bellows vacuum table with 9 kW pump provides full-surface hold-down, but zoning must match your nesting pattern. If your typical layout includes many small tabs or inserts, the zone configuration is adjusted before shipment so suction concentrates where parts are smallest and most prone to lift.

Q: Can the control panel and software match my local language and file workflow?
A: The PLC control panel supports optional display languages specified at order confirmation. The dedicated packaging box structure design software imports PLT, DXF, AI, and PDF profiles. Your existing file format is verified against the software during the pre-order stage to ensure direct import without conversion steps.

Q: What happens if my voltage supply does not match the standard 380V option?
A: Voltage is configurable at 110V, 220V, or 380V and confirmed during the specification step before production. The electrical schematic and plug type are locked to your facility supply, so no on-site transformer or rewiring is needed at commissioning.

Q: How is cutting quality verified before I commit to the order?
A: A sample cutting report is produced on your own material — including your specific board grade, flute profile, and foam density. The report documents edge quality, cutting accuracy, and cycle time using your production file, so you evaluate the result before the machine enters assembly.

Reviews (0)

商品评价

There are no reviews yet.

Be the first to review “1625 Digital Cutter for Packaging & Carton Sample Making – Factory Supply”

Your email address will not be published. Required fields are marked *

Shipping and Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.